George Papaks of Georgio Builders Recommends The Rental Depot

“The Rental Depot is always a great provider of quality equipment and service,” says George Papaks of Georgio Builders

George Papaks continues to say – ” It doesn’t matter what type of equipment I am after – The Rental Depot is the hire company Georgio Builders prefer to use”.

Georgio Builders will forever continue their relationship with the team @ The Rental Depot.

PLEASE NOTE: THIS IS A TEST BLOG POST
All representation on this post is fictional.

With the rise in the growing economy there has been increase in the development of the infrastructure. For this construction work has been on rise, which have led to the demand of construction equipment. Construction equipments are of various types and serve different purposes.

Heavy construction equipment include bulldozers & track loaders, rubber tire loaders, cable cranes, hydraulic cranes, stationary cranes, graders scrapers & rollers, paving equipment, rock crushers, screeners & washers, trenching equipment, etc. There has been technical advancement also in the attachments and part required for the construction equipment. Three are various types of buckets, blades, couplers cutters, forks, grips, hammers and shovels.

There has been a growth in companies opting for rental construction equipment or leasing them. The main reason behind this is lower capital investment and lower maintenance. Moreover, good construction equipment is available at great bargain prices. This construction equipment give good productivity paralleled to new equipment. Also the smaller fleet ar able to squeeze out construction equipment.

Apart from purchase, leasing and rental of the construction equipment, there are also security issues attached to them. These days companies and constructors are much worried about securing their construction equipment. Since construction equipment do not have any tracking number on them thus recovery of any stolen construction equipment is very difficult. Most of the time the construction equipment is recovered several kilometers away from the construction site. But recovery of equipment is very difficult. Thus a new system of putting the tracking number has been put into effect. Earlier, for security purposes companies used to tie up the construction equipment with chains and padlocks but of late these have been proved to be inefficient.

Now-a-days construction companies are asking the manufacturers to instill laser-cut identification labels with key identification numbers. These key numbers would prove to be the tracking number just like engine number and chassis numbers in automobiles. A proposition of seventeen-digit global numbering system has been put forward in the construction industry to prevent stealing of construction equipment. This would ensure recapturing of stolen construction as well prevention of shipment of stolen construction equipment to other neighboring countries.

Advancement in the construction industry has led to development of operator comfort–air-conditioned cabs, steering wheels that can be tilted and devices to prevent noise pollution. Producers are featuring global positioning satellite technology for improved surveying and for use in driver-less trucks operating on a fixed route.

Increase or decrease in the construction sector directly affects the sale or purchase of the construction equipment. If the economy of the country is growing at a healthy pace, it leads to development of new projects as well as upgrading the older ones. All this requires construction equipment either to be purchased or leased by the construction companies. Further, an association for the inspection and certification of used construction equipment has been formed. This has been done to promote online sales of used heavy construction equipment. This is required by the companies taking up projects at various locations in the foreign land.

With the steady increase in construction projects nationwide year after year, it’s no wonder the average price of the typical piece of heavy equipment is over $135,000. Let’s face it; we wouldn’t be able to get our jobs done if we didn’t have these behemoths available. But there are some hidden costs within their benefits.

Technology –

The technology used in heavy equipment is far beyond anything we have seen in the past and the costs to hire someone to operate a particular piece of equipment is skyrocketing. The national average for a heavy equipment operator is in the $60,000 range.

Maintenance –

Powerful heavy equipment is useless if there is no around to fix it. Working with heavy equipment is no easy task. If your company has purchased some type of machinery that has no maintenance agreement included, one major repair jobsite can wipe out the profit you had built into the project.

Theft –

Every year, millions of dollars worth of heavy equipment is stolen from the job site. Heavy equipment is tempting for thieves. The stolen heavy equipment is either parted out or taken to another area where it is sold or used by another business.

Underutilization –

When heavy equipment is underutilized your costs of acquisition skyrocket and your loss in value is occurring unnecessarily. Heavy equipment is not a cheap undertaking and you should find ways to maximize the value of your machinery. One thing to consider is renting or leasing your equipment when it is idle.

Worker injury –

Construction equipment is inherently dangerous to work around, especially for employees on foot. While heavy equipment is being operated, potentially dangerous materials may be present, electric circuits may be live, flammable or noxious liquids or gases and other potential dangers will exist. How are you prepared for these events should one occur? Remember: The best policy around heavy equipment is to take no chances.

As you see there are other things you need to consider as your fleet of heavy construction equipment grows and there are no easy answers. Talk to others in your area about how they manage their inventory and how they maintain, operate, move, and utilize their equipment.

Today backhoes are commonly found on almost every construction job. It is hard to imagine any dirt moving job without some backhoe work.Backhoes are compact and easy to maneuver. One of the reasons they are so popular is the ability to quickly do small jobs otherwise done by hand. Rubber tires give it mobility to handle material and load out unused spoil from excavations. They can also work around obstructions and in tight areas.

The commonly seen tractor with a front bucket and a rear mounted backhoe was first built in 1953 by a British company known as JCB. In fact, for years a backhoe tractor was known as a JCB no matter who built them. In 1957, Case Tractor Company bought out the original manufacturer. With the acquisition by Case came many improvements to the original design.After the acquisition was complete, Case engineer Elton Long and his team brought in resources from throughout the company to finish development of an integrated loader/backhoe under a very tight deadline. By early spring, Case had successfully merged technologies to create the Case 320, the first fully integrated loader/backhoe made and warranted by one company.

Many people think the term back hoe refers to the fact that the digging attachment is located on the rear of the tractor. However, the term originally referred to the action of the bucket. The digging operation is carried out by using hydraulic power to pull the bucket back towards the tractor.Now, the backhoe can be even more versatile with a backhoe attachment for your Bobcat or other skid steer loader. Industrial Products and Equipment has now made arrangements with the manufacturer to market a simple yet very efficient dirt moving machine.

The skid loader backhoe attachment, quickly converts the skid steer into a excavator or trencher. With the addition of a thumb, your loader can also be used to carry and place heavy and bulky items. If you need to transport, the dirt from a trenching operation, the bucket can be quickly swapped using the loaders quick attach feature.While a traditional tractor style backhoe is highly maneuverable, nothing beats a skid steer loader for getting into small tight places. Having a simple quick connect back hoe will add a great deal of versatility to your machine.